In the setting of Stenter used daily, users should not only pay attention to reasonable and standardized operation, but also consider safety issues. The so-called safety not only needs to maintain the safety equipment of the tenter frame, but also guarantees the safety of food. Therefore, in practice, how should we pay attention to security issues?
First, a stowing machine equipment. In general, the equipment should be placed in a well-ventilated, non-corrosive gas environment. In addition, the storage device should ensure that it is flat and dry, so that the concrete base layer is not less than 150 mm. At the same time, to ensure that the two sides of the needle plate are in a symmetrical position and no deviation is allowed.
Secondly, when installing the tie rod, it is important to ensure that the machine is free of impurities or other obstacles that hinder the normal operation of the chain. During the installation of the conveyor roller, the guide roller and the roller fall parallel to each roller required for calibration.
Third, regarding the graphics of machinery and equipment, it is important to pay attention to this period of time in this case. Remember, no one is standing near the device. The maintenance staff does not work. Carpet Adhesive Machine In addition, check the room to ensure that the temperature of the electronic control box should be within the specified range. If dust and other debris are in the electronic control box, it should be in place at the time.
In addition, in the determined temperature control program, the device tension setting position should be checked in advance of the driving part of the device to ensure flexible operation. The full width should be adjusted to the desired width, and the edge tracking and overfeed rate should be adjusted to predetermined values.
Introduction Of Stenter Installation
Öffentliche Gruppe
Active vor 3 Jahren, 9 Monaten
Neueste Kommentare